����Vlog

Forging Steel: Types, Processes and Equipment

Chapter One: Understanding Forging Steel

Forging steel is a production technique that molds steel through localized compressive forces, such as hammering, pressing, and rolling. This method is often utilized to create top-quality steel components with precise tolerances. Steel destined for forging is produced by mixing iron and carbon under managed pressure conditions to achieve optimal ductility, fatigue resistance, tensile strength, and superior grain structure.

The process of forging steel is divided into three main categories: cold, hot, and hardened, each defined by the specific temperatures and pressures used in forming. This shaping approach gives forged steel distinctive qualities that distinguish it from cast steel, such as improved solidity, anisotropy, and uniformity.

The forging process enhances the strength of the metal, making it perfect for mechanical and industrial use. Forged components are highly reliable, thanks to their consistent composition and structure, making them well-suited for enduring significant loads and stress. Moreover, they are free from voids, pockets, and other imperfections that might lead to load failure.

Chapter Two: What is the forging steel process?

Do all forging steel processes follow the same form, involving the application of force to a steel billet that is either heated or processed at room temperature? How does the temperature at which forging is completed depend on the processing type, including the use of dies, presses, rollers, and other methods? Is the key factor in every method the application of force and the ductility of the billet?

Design

Does forging steel, like all manufacturing processes, start with a design or plan for the final product's shape? For die forging, is a die created with the desired shape, while rolling, pressing, and other forging methods also rely on a design when applying force to the billet?

Billet Cutting

Are billets, produced by hot rolling or extrusion and having a square or rectangular shape with uniform dimensions along their length, used to create various products? Before forging, are these raw billets cut to lengths that match the design specifications? Are the grades of steel billets determined by their carbon content and microstructure, and are they carefully selected to meet the specific needs and requirements of the design?

Temperature

Does the temperature of the billet vary depending on the shaping process used? For example, is the billet heated in processes like die forging, which is a hot forging method, to make it more malleable? In contrast, does cold forging shape the billet at room temperature without heating, requiring more force and pressure? Is the heating of the billet the primary factor that differentiates between these processes, with heated billets being easier to form due to their increased ductility and malleability?

Steel Forging Process

What are the different forging steel processes, such as open die forging, closed die forging, roll forging, cold forging, and extrusion? How do these processes vary in terms of the application of force and pressure on the billet to achieve the desired shape? What types of products are produced by these methods, including structural parts like aircraft landing gear, jet engine shafts, turbines, and hand tools such as chisels, rivets, screws, and bolts?

Finishing

Is finishing a common after-processing stage in forging steel, involving steps such as grinding, removing flash, smoothing surfaces, buffing, or other machining applications to achieve the desired texture? How do the finishing methods vary depending on the forging process used?

Shot Blasting

Is shot blasting a more aggressive form of finishing that involves pummeling a forged part with metal beads, sand, or other particles? How does shot blasting achieve a clearer and smoother surface finish compared to other finishing methods?

Heat Treatment

Heat treatments are applied to forged parts to improve the mechanical properties of the metal, including its strength. Common forms of heat treatments are normalizing, quenching, annealing, tempering and hardening, and spheroidizing. The use of heat treatments is only included in the forging process when it is required and part of the design.

• Process Annealing - Process annealing involves heating the forging to a temperature lower than the normalizing temperature and allowing the forging to cool in the open air. The heating process alters grain size and the flow of the forging.
• Normalizing - In normalizing, the forging is heated and allowed to cool to restore the ductility of the metal.
• Quenching - Quenching involves rapidly cooling the metal, which transforms the carbon steel from austenite to martensite. The cooling process is completed using forced air or nitrogen.
• Tempering - Tempering is used to reduce the hardness of the forging by heating it to below its critical point and allowing it to cool in the open air. The temperature of the heating process determines the amount of hardness that is removed.
• Spheroidizing - Spheroidizing creates a spheroidite structure, which is a microstructure with sphere like cementite particles that are the most ductile and machinable forms of steel.

Surface Treatment

The concluding phase of the forging procedure involves various surface treatment methods. These treatments can range from basic tasks like washing the completed forging with water or oil to more intricate processes such as zinc coating, galvanization, electroplating, or applying paint. The choice of surface treatment depends on the specific needs dictated by the forging's design.

Chapter Three: How is steel alloyed for forging?

A crucial aspect of steel forging is choosing the appropriate alloyed steel, as the added elements enhance its physical and mechanical properties. These properties include hardness, strength, toughness, high-temperature performance, and resistance to corrosion and wear. Common alloying elements include boron, chromium, molybdenum, manganese, nickel, silicon, tungsten, and vanadium. Less frequently used alloys comprise aluminum, cobalt, copper, lead, tin, titanium, and zirconium.

There are 57 different types of steel, each with properties that vary based on the percentage of elements mixed into the alloy, which can range from 1% to 50% of the composition. To organize these steel alloys, they are categorized by their elements and the percentage of alloying components. High alloy steel contains more than 8% alloying elements, while low alloy steel has less than 8%.

Carbon Steel

Carbon is a crucial element in alloyed steel, constituting about 0.35% of its composition. Adding carbon enhances the hardness, strength, and hardenability of steel. However, this increase in carbon also has drawbacks, such as increased brittleness and reduced weldability, due to the formation of martensite.

The three classifications of carbon steel are plain, low, and high carbon steels. Plain steel contains less than 1% carbon along with small amounts of manganese, phosphorus, sulfur, and silicon. Low carbon steel has a carbon content below 0.25% and is alloyed with elements like nickel, chromium, molybdenum, manganese, and silicon to enhance strength and improve low-temperature toughness.

High alloy steel includes stainless steel, which contains at least 12% chromium and a significant amount of nickel. It is classified into three basic types: martensitic, ferritic, and austenitic. Ferritic stainless steel has the highest chromium content, ranging from 12% to 27%, with small amounts of austenite alloys. The unique properties of stainless steel, including its resistance to corrosion and staining, contribute to its popularity as a steel alloy.

Society of Automotive Engineers (SAE) Steel Designations

The SAE numbering system was developed to define and identify different types of carbon steel and steel alloys. This system uses a four-digit numbering format, where the first digit indicates the general grouping of steels. For example, the number 1 represents carbon steel. In this system, plain carbon steel is denoted by 10XX, resulfurized carbon steel is represented by 11XX, and rephosphorized carbon steel is indicated by 12XX.

In the SAE numbering system, the second digit signifies the steel's major alloying element, with zero (0) indicating no sulfur, which is crucial for machinability. The final two digits in the four-digit code represent the carbon concentration. Additional letters may be included between the second and third digits to specify the presence of other elements, such as “L” for lead and “B” for boron. An “H” added to the end of the SAE number denotes enhanced hardenability.

Initial SAE designation numbers:

• SAE 1 = Carbon Steels
• SAE 2 = Nickel Steels
• Sae 3 = Nickel-Chromium Steels
• Sae 4 = Molybdenum Steels
• Sae 5 = Chromium Steels
• Sae 6 = Chromium-Vanadium Steels
• Sae 7 = Tungsten-Chromium Steels
• Sae 8 = Nickel-Chromium-Molybdenum Steels
• Sae 9 = Silicon-Manganese Steels and Other SAE Grades

While the SAE/AISI system is a common standard for classifying steel alloys, various other methods are also employed by manufacturers for steel classification, such as:

• Composition
• Manufacturing Method
• Finishing Method
• Form or Shape
• De-Oxidation Process
• Microstructure
• Strength per ASTM standards
• Heat Treatment
• Quality

How Steel Alloys are Made

The quality and performance of a steel alloy are closely tied to its manufacturing process, as each method imparts specific characteristics and properties to the alloy. Despite numerous advancements in technology, the fundamental steps for producing steel alloys have remained largely unchanged.

Steps to the Production of Alloy Steel

Step One - The base alloys are melted in a furnace at 3000°F (1648.9°C) for 8 to 12 hours. Step Two - The molten steel is annealed by rapidly cooling and heating. It is first heated to 1000°F (537.7°C) for four hours and then cooled to 35°F (1.7°C) for two hours. The annealing process removes impurities and improves bonding between the base elements. Step Three - The metal is air cooled for four hours. Step Four - The steel alloy is dipped in a bath of hydrofluoric acid to remove mill scale, an iron oxide that peels from hot steel, that is caused by annealing. Step Five - The steel is annealed and descaled a second time. Step Six - For the second time, the steel is heated to 3000°F (1648.9°C) into a molten state. Step Seven -The molten steel is poured into casts, blooms, billets and slabs, which are allowed to cool for four hours.

Steel Alloys Used for Forging

Alloy steels are widely used because of their low cost, availability, ease of processing, and desirable mechanical properties. They respond well to heat and mechanical treatments, resulting in enhanced hardness, strength, ductility, corrosion resistance, and weldability after forging.

• Steel Aluminum Alloy - Aluminum deoxidizes and degasifies steel and controls its grain size. As with all aluminum products, as an alloy, it makes steel lighter and forms slowly.
• Steel Carbon Alloy - Carbon increases steel’s tensile strength, which makes it harder, less ductile, tougher, and resistant to wear. The amount of carbon determines the alloys strength and hardness.
• Steel Cobalt Alloy - Cobalt reinforces the strength of steel such that it can endure high temperatures and maintain its strength. When combined with nickel and aluminum, steel cobalt alloy makes alnico magnets.
• Steel Lead Alloy - Lead improves steel’s ability to be machined, reduces friction where edges make contact, and improves chip breaking.
• Steel Manganese Alloy - Manganese increases steel's impact strength and resistance to abrasions. It has very high tensile strength between 350 megapascals and 900 megapascals (MPa), which increases dramatically as the steel alloy hardens.
• Steel Molybdenum Alloy - As with other alloys, molybdenum improves the strength of steel by improving its hardness and enabling it to withstand high temperatures and sudden shock. When combined with other alloys, the properties of steel molybdenum alloy radically increase.
• Steel Nickel Alloy - Steel nickel alloy has the same properties as steel manganese with the added properties of rust resistant and improved elasticity.
• Steel Nitrogen Alloy - Nitrogen makes steel stable and less breakable.
• Steel Phosphorus Alloy - Steel phosphorus alloy is formed in conjunction with sulfur and manganese since it makes steel susceptible to cracking. Phosphorus increases steel’s strength and resistance to corrosion.
• Steel Silicon Alloy - Silicon deoxidizes steel, makes it stronger, and increases its magnetic permeability.
• Steel Sulfur Alloy - Sulfur as an alloy is used in combination with manganese due to the fact that sulfur decreases steel’s weldability, ductility, and toughness. Combined with manganese, the negative properties disappear.
• Steel Titanium Alloy - Titanium and steel are exceptionally tough metals. When they are combined, they create an even stronger alloy. Manufacturers normally include carbon in the processing to create a strong corrosion resistant metal.
• Steel Tungsten Alloy - As with other alloys, tungsten helps steel maintain its strength at high temperatures and prevents it from breaking under extreme force.
• Steel Vanadium Alloy - Vanadium alloyed with steel increases the strength of steel and removes any oxygen or nitrogen. Steel vanadium alloys are strong, tough, and weldable.

How to Choose a Steel Alloy for Forging

Choosing the right steel alloy is a complex and challenging process that requires careful consideration, as it plays a crucial role in determining the mechanical properties of the final product.

• Performance - The performance of an alloy ensures the safe successful operation of a product and includes mechanical properties, physical properties, and chemical properties. The major factor in the selection of an alloy and its performance is the working conditions of a product, which include stressful conditions such as load, distribution, and strength. Other influences are the working environment’s temperature and the types of medium the product will come in contact with.
• Process - In the case of forging, it is important to select an alloy that can endure the stress of the application of force during processing.
• Cost - This aspect of the selection process can be difficult since the first thought may be to get the least expensive alloy. Although that may be a consideration, it is more important to choose an alloy that best fits the parameters of a design and has the strength and formability to meet the predetermined criteria.
• Composition and Properties - Composition, microstructure, strength, flexibility, and machinability are factors that determine the type of forging process to use when forging various products.
• Deformation - A steel alloy for forging must have the plasticity, malleability, and thermal stability to undergo the stress of deformation without failing. The effective and proper selection of materials that align with forging requirements ensures that manufacturers produce quality products that meet design standards and specifications.

Chapter Four: How do you choose a steel supplier?

Selecting a steel supplier can be challenging, time-consuming, and complex due to the numerous options available. While the internet is a valuable tool for researching suppliers, it is essential to consider additional factors to ensure a successful choice.

Quality

During the initial selection process for a steel supplier, obtaining a sample of the steel they produce is crucial to ensure it meets the quality standards required for forging and final products. Most reputable suppliers will have ISO certification to verify their product quality. Additionally, researching the company’s background and rating is important, as some companies may engage in inappropriate business practices.

Price

Pricing is a crucial factor as it directly affects the cost of the final product. Most manufacturers provide clear pricing guidelines and offer cost analyses to help determine the appropriate type of steel and its suitability for the product being produced. However, in rare cases, a company might engage in price gouging by frequently adjusting its costs and prices.

Customer Service

Customer service is a central concept in modern business, significantly impacting the relationship with customers and the quality of the product. Often, customers are willing to pay a premium for steel when exceptional customer service is provided. Effective customer service is fundamental to manufacturing, ensuring assistance is available under all conditions and at all times. This aspect of business is crucial for transforming a single transaction into a lasting partnership and relationship.

Good Reputation

In the steel supplier market, a select group of highly qualified suppliers are known for delivering high-quality products at reasonable prices. While the internet can offer basic information about a company, including its website, the most reliable way to assess a supplier’s credibility is by contacting their previous customers. Even if there are negative reviews, it's important to consider how the supplier addressed and responded to those concerns.

Turnaround Times

During initial negotiations with a supplier, it is crucial to specify the details of how and when the steel will be delivered. The condition in which the steel arrives can be a decisive factor in choosing a supplier, based on the application’s needs. Additionally, the type of steel and alloy affects turnaround times, as some alloys require longer processing periods.

With steel production rapidly increasing, reaching millions of tons per month, selecting a supplier that precisely meets your needs becomes crucial. Thorough consideration and planning are essential for ensuring a successful and profitable partnership.

Chapter Five: What are the different types of forging steel processes?

Forging steel is a cornerstone of the metalworking industry, with a history spanning centuries in the production of high-tolerance, quality products. Initially, metal forging involved blacksmiths using an anvil and a heated forge, where they hammered heated metal into shapes for swords, cookware, battle shields, and other items. Over time, the process has advanced significantly with the introduction of modern technology and specialized equipment, enhancing both efficiency and precision.

Open Die Forging

Open die forging involves deforming steel by placing it between dies that do not enclose the steel. The shape of the billet is changed by hammering or stamping it by a series of repetitions with each blow to the steel billet changing its shape. The workpiece is shaped between the top ram and a die that is placed on the bottom anvil. It is an imprecise forging method used for shaping simple forms. Once the process is completed, the forged piece requires a significant amount of machining.

Closed Die Forging

Closed die forging, also known as impression die forging, is employed to produce small to medium-sized components. This plastic deformation process involves forcing carbon steel between two halves of a die, allowing for the creation of intricate parts with complex geometries. The key to this process is the shaping and forming of the die itself, which requires a complex machining process to achieve the desired results.

In closed die forging, the bottom part of the die is fixed to an anvil, while the hammer portion repeatedly strikes the die cavity to shape the billet. The force of these repeated blows pushes excess material, known as flash, out of the die. This flash cools quickly, preventing additional flash formation and acting as a barrier to keep the steel from escaping the die, ensuring that the steel fills the die cavity completely.

In industrial closed die forging, the workpiece is processed through a series of dies. The initial die is used to distribute the metal and create a rough shape of the workpiece, often through fullering, edging, or bending impressions. Subsequent die cavities, known as blocking cavities, are designed to progressively refine the shape, each one resembling the configuration of the final product.

The forging load must be precisely calibrated to ensure the final product achieves the correct form. If the load is too low, the carbon steel will not fully conform to the shape of the die. Conversely, if the load is too high, it can overstress the steel, resulting in cracking and improper deformation.

Cold Forging

Cold forging deforms steel at or near room temperature, below its recrystallization temperature. This lower temperature makes the forging process more challenging, requiring greater energy and force. Because the steel billet is brittle at this temperature, it is prone to cracking during forging. However, cold forging compresses and elongates the steel grains, enhancing their strength and resilience.

The basis of cold forging is impacting the workpiece to plastically deform it, under compressive forces, where the workpiece is located between a die and a punch. It is a displacement process that takes the workpiece and forces it into a desired shape. Some of the techniques of cold forging are extrusion, coining, upsetting, and swaging, each of which can take place in the same stroke or separate strokes.

• Extrusion – With cold extrusion, pressure is applied to a steel billet to force it through a specially designed die. A punch or press is used to apply the pressure to cause the billet to take the shape and form of the die. The process is divided into forward extrusion, backward extrusion, compound extrusion, and radial extrusion.
• Coining – In coining, steel is subjected to pressure to deform the workpiece to change its surface. It is used when very fine features or high relief is necessary for a part.
• Upsetting – The upsetting process involves horizontally pressing against the end portion of bar stock to form an end or shape.
• Swaging – Swaging is used to change the size and shape of a workpiece. It is similar to extrusion in that it forces the workpiece through a die. With swaging, no material is removed from the workpiece but has its shape and size changed.

Roll Forging

Roll forging, also known as roll forming, utilizes cylindrical or semi-cylindrical rollers with grooves to shape and form steel. As the round or flat bar stock passes between these rollers, its thickness is reduced while its length increases. Roll forming can be performed with either cold or hot bar stock, though hot bar stock is often preferred. In the heated process, the bar stock is sufficiently heated to make it malleable and ductile, allowing for easier shaping. The grooves in the rollers are precisely designed to match the final part’s geometry, forging the workpiece to the correct dimensions.

Ring forging is a distinctive type of roll forging that utilizes ring rollers to compress and reduce the size of a steel ring. This method eliminates the need for welding rings and produces rings with precise, uniform shapes.

Drop Forging

Drop forging uses impression dies and a heavy hammer to compress steel billets into designed shapes. A drop hammer that contains the upper die is a mechanical device that is powered by a pneumatic or hydraulic cylinder. The lower half of the die, as is found in open die forging, is attached to the anvil directly below the drop hammer. The steel billet is heated to a temperature that makes it malleable and placed in the lower die on the anvil.

The drop hammer exerts intense pressure on the steel billet, shaping it to fully occupy the lower die cavity. As the hammer impacts the die, excess material, known as flash, is expelled from the die impression. A draft angle is incorporated into the die design to facilitate the easy removal of the finished component.

Hot Forging

Hot forging is a widely used method for forging steel, reminiscent of traditional blacksmithing with a hammer and anvil. By heating the steel, the process reduces the amount of force required to shape and mold the workpiece. The increased flow of heated steel makes it well-suited for both open and closed die forging. Additionally, the heating process anneals the workpiece, relieving internal stresses and preparing it for further processing.

In hot forging, the workpiece is heated to a temperature above its recrystallization point. During recrystallization, the original grain structure of the steel is deformed and replaced by new, stress-free grains that continue to grow until the original grains are eliminated. This process helps to counteract the effects of strain hardening. Typically, the recrystallization temperature is between one-third and one-half of the steel's melting point.

Hot forging allows for precise control over the steel's microstructure, enabling the fine-tuning of its strength and durability. This method is particularly beneficial in manufacturing processes that involve high static and dynamic loads, as it ensures that the final products meet demanding performance requirements.

Heated Die Forging

Heated die forging, a variation of hot forging, is used to achieve tighter tolerances, thereby reducing the need for machining and lowering steel costs. By utilizing a heated die, this method minimizes the number of preforming and blocking processes, which further decreases processing and tooling costs. Additionally, slower ram speeds can be employed to reduce the pressure required to form the workpiece.

Using cold dies can result in uneven plastic flow of the heated steel, a phenomenon known as die chilling. To prevent this, dies are heated to temperatures between 400°F and 500°F (205°C to 260°C) using furnaces or other methods, depending on the equipment. The most effective approach is to heat the die to match the temperature of the workpiece, a process known as heated or hot die forging.

Die heating is a crucial aspect of modern forging, with electric infrared heating being the most efficient method. Compared to gas or electric furnace heating, direct flame heating, electric calrod radiant heating, and gas radiant heating, infrared technology provides more uniform heating, eliminating hot or cold spots on the die. Additionally, the mobility of electric infrared heaters allows them to heat the die in place, ensuring continuous and consistent temperature control.

Chapter Six: What are the types of steel used for forging?

The term "steel" encompasses a broad range of alloys created by combining iron with carbon and other elements. The use of steel dates back to the Iron Age, when it was discovered that iron was stronger and harder than bronze. For centuries, iron production was heavily reliant on the quality of the raw ore and the methods used to produce it.

Over the centuries, the processes for producing steel were refined in regions such as China, India, Sri Lanka, Turkey, and Europe. By 2000 BCE, forged iron, with around 0.8% carbon, resulted in a hard but brittle form of steel. Metallurgists in Egypt and China discovered that heating this brittle steel, a process known as tempering, made it less brittle. The dynamics of steel production advanced significantly during the First Industrial Revolution, as hotter furnaces were developed to add carbon and produce stronger, more durable steel.

The main types of steel include low carbon steel, mild steel, carbon steel, and stainless steel. Mild steel is available in grades like A36 and 1018, with 1018 being the purest form. Carbon steel contains between 0.4% and 1.5% carbon. Stainless steel, known for its 10.5% chromium content, is available in martensitic and austenitic varieties, which can be either hardened or non-hardened.

Alloy steel is widely used in the steel forging process due to its enhanced strength, wear resistance, and toughness. This type of steel, based on iron, is mixed with other elements to improve its physical properties. Common alloying elements include chromium, molybdenum, manganese, nickel, vanadium, boron, and silicon. Some of the most commonly used alloy steels for forging include grades 4140, 4340, 6150, and 8620.

Alloy 4140

Alloy Steel 4140, which contains chromium, molybdenum, and manganese, is known for its excellent strength, toughness, ductility, and resistance to fatigue, abrasion, and impact. It maintains its performance and resists stress and creep at temperatures up to 1000°F (537.8°C). Additionally, 4140 is available in leaded grades that enhance machinability, although these leaded versions are less suitable for high-temperature applications due to reduced ductility.

The process of making alloy steel 4140 involves several steps. First, the alloying elements are placed in a furnace, where they are melted together. Once the molten steel cools, it undergoes annealing, often repeated multiple times to relieve internal stresses and refine the grain structure. After annealing, the steel is remelted and poured into molds. The resulting steel can then be subjected to hot or cold working to achieve the desired shape and properties.

Alloy 4340

Alloy 4340 is a nickel-chromium-molybdenum alloy renowned for its exceptional toughness, strength, and fatigue resistance. Heat treating 4340 further enhances its strength while preserving its toughness and wear resistance. Additionally, the heat treatment process provides improved resistance to atmospheric corrosion.

Alloy 4340 can achieve high strength levels up to 150 KSI 0.2% PS with proper heat treatment. It is often chosen over Alloy 4140 for its superior strength, better hardenability, and exceptional impact resistance. The heat treatment process is critical in the production of Alloy 4340, requiring careful monitoring to ensure the desired hardenability and performance characteristics are achieved.

Alloy 6150

Alloy 6150 is a low-alloy steel that includes carbon, small amounts of vanadium, and chromium, providing it with excellent shock resistance and toughness when properly heat treated. The addition of vanadium distinguishes it from Alloy 5150, enhancing its hardness. Key characteristics of Alloy 6150 include oil hardening, resistance to vibratory stress, medium hardness, and high torque strength. It also features low distortion properties and responds well to heat treatment.

Alloy 6150 is primarily utilized for manufacturing medium to large components that demand high tensile strength and toughness. Its applications include automobile parts like crankshafts, steering knuckles, connecting rods, spindles, gears, and gear shafts. This alloy is forged within a temperature range of 1600°F to 2150°F (870°C to 1175°C). For optimal results, it should be slow-cooled and annealed to enhance machinability.

Alloy 8620

Alloy 8620 is a nickel, chromium, and molybdenum steel alloy known for its exceptional strength and wear resistance. The nickel content imparts excellent core toughness. It is forged at temperatures ranging from 1700°F (925°C) to 2250°F (1230°C) and is air-cooled post-forging. After cooling, alloy 8620 is readily machinable and amenable to heat treatment. Its flexibility during hardening processes allows for significant enhancement of its core properties.

Due to its low carbon content, alloy 8620 cannot be hardened by flame or induction methods but is effectively hardened through nitriding. This alloy is widely utilized in applications that demand both toughness and wear resistance. Common uses for 8620 include gears, crankshafts, shafting, axles, bushings, pins, bolts, springs, hand tools, and various other machinery components.

The four steels listed above represent just a fraction of the many varieties used in the steel forging process. When selecting a steel for forging, the primary consideration is the temperature range at which the steel can be forged. Most steels can be forged within temperatures from 700°C to 1300°C (1290°F to 2300°F). The ductility of steel, influenced by its carbon content and alloying elements, varies accordingly. Steels with higher carbon content generally exhibit lower ductility and require higher temperatures to alter their grain structure.

Leading Manufacturers and Suppliers

Chapter Seven: What are some common terms used in steel forging?

The steel forging sector employs a distinct set of terminology to describe both the techniques and the quality of forged products. This specialized vocabulary covers every facet of the forging process. Below is a selection of terms commonly used in this industry.

Backward Extrusion - This technique involves directing a workpiece to move in the opposite direction of a punch or die's motion.

Blast Cleaning - A method of finishing and cleaning parts using abrasive materials like grit, sand, or shot.

Board Hammer - This process involves hardening a workpiece's surface while keeping the core soft. Methods include carburizing, carbonitriding, cyaniding, and flame hardening.

Cold Shut - A defect on the surface where the forged metal folds over itself, typically occurring at intersections of vertical and horizontal surfaces.

Compressive Strength - The maximum pressure a metal can endure without fracturing or permanently deforming.

Descaling - The removal of scales from a workpiece using wire brushes, water spray, and gentle impacts.

Draft - Excess material on the side of a workpiece that assists in its removal from a die.

Drawing - A forging technique that reduces and lengthens metal stock using flat dies.

Dye Penetrant Testing - An inspection method using liquid dye to reveal flaws in materials.

Elastic Limit - The maximum stress a metal can tolerate before it undergoes permanent deformation.

Electroslag Remelting (ESR) - A pre-forging process where steel is remelted through slag to enhance uniformity and improve its properties.

Finish Allowance - The amount of material left on a workpiece's surface that will be removed during the finishing process.

Heading - A forging process that forms heads on the ends of rods and wires.

Inclusions - Nonmetallic particles found in ingots that can affect the metal's directional properties based on their shape and distribution.

Lap - A defect characterized by a seam on the surface of a workpiece, resulting from folding over or sharp edges.

Magnetic Particle Inspection (MPI) - A testing method for detecting surface and subsurface defects in magnetic metals such as nickel, iron, and their alloys.

Normalizing - A heat treatment process where a workpiece is heated above its transformation temperature and then cooled to refine its structure.

Reduction in Area - A measurement from a tensile ductility test indicating the difference between a workpiece’s original cross-sectional area and its smallest cross section after testing.

Segregation - The uneven distribution of alloying elements that occurs during solidification.

Shrinkage - The contraction of metal due to cooling after hot forging.

Superalloys - High-performance alloys based on iron, nickel, or cobalt, known for their superior high-temperature mechanical properties and oxidation resistance.

Ultrasonic Testing - A method using ultrasonic waves to identify structural defects.

Chapter Eight: What factors should be considered when selecting a steel forging company?

Steel forging companies all claim to have the most efficient and effective processes and procedures in the market, which can make it challenging for customers to choose one that aligns with their project requirements. Experts in steel forging have provided valuable tips for selecting the right forging company.

Cost

When considering steel forging, cost is typically the primary concern in industrial processes. However, opting for the least expensive option may not always be the wisest choice. A comprehensive evaluation of a producer should encompass factors beyond just cost.

Turnaround Times

During sales pitches, emphasis is often placed on turnaround times. To gain a clearer understanding of actual turnaround times, it's crucial to request specific information about recent orders: when they were placed, when they were completed, and when they were delivered. It's also important to inquire about the delivery process for the final product. While some companies excel in turnaround times, they may lack an efficient delivery system.

Timeline

When considering turnaround times for forging steel parts, one critical aspect is the timeline required for the actual forging process. This timeline also encompasses the duration needed to create tooling specific to the forging process. For unique or uncommon parts, a significant amount of time is often necessary to fabricate the dies, which consequently increases the overall forging lead time.

Complexity

The complexity and size of a forging significantly influence several factors: the choice of forging process, the design of dies, the selection of a forging company, and ultimately, the cost of the forging. More complex parts often necessitate additional finishing and machining operations, which extend the timeline and increase the overall turnaround time.

Industry Experience

Experienced steel forging companies, with years of industry involvement and a solid reputation, possess a deep understanding of handling forgings that feature unique requirements. Throughout the project development process, these seasoned companies can offer dependable information on turnaround times, tooling requirements, and effective delivery methods.

Certification

Highly qualified steel forging companies undergo rigorous vetting, certification, and legal approval processes. The majority of reputable companies hold International Organization for Standardization (ISO) certification, which mandates adherence to specific guidelines for customer service and processing standards in order to achieve certification.

Customer Service

In modern industrial businesses, what distinguishes successful companies from average ones is primarily customer service. This aspect of manufacturing processes has become pivotal in attracting customers and achieving long-term success. While pricing may initially attract customers, it is customer service that fosters lasting relationships and sustains ongoing sales. The quality of service, responsiveness to issues, and adaptability to change are key factors that contribute to building a reputable brand and ensuring sustained success.

Technological Advancements

Like many industries, steel forging has seen significant technological advancements that have revolutionized its processes. Outdated and dusty operations of the past have given way to modern, innovative methods that enhance efficiency and yield high-quality products. Evaluating these technological advancements is a critical aspect of the selection process, often included in factory tours or presentations to provide a comprehensive understanding of a forging company's capabilities.

Chapter Nine: What types of products can be produced through steel forging?

Steel forging remains a fundamental process essential for manufacturing a broad spectrum of highly durable products across diverse industries. Despite its ancient origins, forging continues to be a cornerstone for producing superior quality components and parts. Its ability to impart desirable physical characteristics at a competitive cost sets it apart from other metalworking methods.

The objective of forging steel is to alter its grain structure through percussive or compressive forces, resulting in components that exhibit increased strength, toughness, and reliability. When heated or cold steel is compressed, it undergoes metallurgical recrystallization, which reconfigures the grain structure to yield exceptionally resilient and dependable parts.

Nozzle for High Capacity Compressors

High-capacity compressors form the backbone of ethylene plants, requiring forged steel parts that resist hydrogen sulfide compounds and endure high-pressure environments. These forged components are essential in petroleum and chemical facilities for their robust strength and reliability.

Hand Tools

Forging steel hand tools is a longstanding practice that has endured for centuries. Pliers, hammers, sledges, wrenches, garden tools, sockets, hooks, turnbuckles, and eye bolts are all crafted through steel forging. Additionally, surgical and dental instruments, as well as hardware for electrical applications like pedestal caps, suspension clamps, sockets, and brackets, are forged for their robustness, reliability, and corrosion resistance.

Vehicle Production

The structural integrity of modern automobiles and trucks heavily relies on components crafted through steel forging. This dependency stems from the superior strength, reliability, and cost-effectiveness of forged parts. These components are crucial in areas subjected to high shock and stress, such as wheel spindles, kingpins, axle beams, shafts, torsion bars, ball studs, idler arms, pitman arms, and steering arms.

Another essential application where forging steel is a necessity is in the powertrain, where connecting rods, transmission shafts and gears, differential gears, drive shafts, clutch hubs and universal joints are forged. Each of these components are produced using alloy or carbon steel due to its cost and reliability.

Farm Machinery and Equipment

One of the most significant breakthroughs in history was the transformation of iron into plowshares. For centuries, farmers grappled with wooden plowshares that lacked the strength and durability to endure continuous use. The advent of iron plowshares, crafted by blacksmiths, marked a pivotal advancement. It allowed farmers to labor for years without the concern of frequent equipment replacement.

Forging steel is crucial for farmers due to its strength, toughness, and cost-effectiveness. Engine and transmission components in heavy-duty farm equipment rely on forgings that withstand impact and fatigue, including gears, shafts, levers, spindles, and tie rod ends. Among all industries, forging has had the most profound impact on farming and food production.

Valves and Fittings

Forged steel's strength makes it indispensable for manufacturing valves and fittings designed for high-pressure applications. Its superior mechanical properties and absence of porosity render it ideal for critical components in the oil and gas industry. Steel's corrosion resistance and ability to withstand heat are also crucial factors for components like flanges, valve bodies, stems, tees, elbow reducers, saddles, and other fittings. In oil field applications, forged steel is used extensively for rock cutter bits and drilling hardware due to its durability and reliability.

Railroads

An intriguing historical tidbit often overlooked is that the original railroad tracks were initially constructed from wood, which proved inadequate for withstanding the stresses imposed by steam engines. In an effort to address this issue, iron was overlaid onto the wooden tracks to improve their durability. However, this solution ultimately proved unsuccessful. It wasn't until the first industrial revolution and the advent of steel forging that modern railroad tracks took shape. These tracks are now crafted from highly durable alloy and carbon steel, marking a significant advancement in rail infrastructure.

In the railroad industry, the use of forging steel has expanded into a wide range of components including anchor shackles, ball bearings, ball joints, beam clamps, bearings, blocks, bolts, clips, chain links, chain pullers, chain shackles, chain slings, chokers, clamps, claws, engine components and parts, and fasteners. The list continues into hundreds of parts, pieces, components, and features that keep the world’s railroads running.

Shipbuilding

In ship construction, a variety of metals are employed, yet steel stands out as the most universally favored material. Its strength and reliability make it optimal for manufacturing high-quality components that withstand fatigue and endure the lifespan of a ship. Forging steel, utilizing advanced technology, is the most dependable method for producing the diverse parts required for ships.

Aerospace

Forged steel plays a vital role in the construction of spacecraft and airplanes, relying on its durability and strength. Unlike in other industries where weight may not be a critical concern, aerospace manufacturing demands lightweight materials. Despite steel being inherently heavy, it can be forged and processed to meet the stringent weight requirements for aircraft construction. Aerospace components such as cross-rolled sheets and plates, turbine rings, bearing rings, fuselage structures, and rotor blades for helicopters are all manufactured using steel forging techniques.

Forging steel demands the utmost engineering expertise and meticulous production control. It has been established that forging steel surpasses steel casting or machining from bar stock due to its unique grain flow, which conforms naturally to the shape of the products. This inherent grain flow enhances the material's performance in handling tensile and shear loads, making forged steel superior in strength and reliability for various applications.

Conclusion

• Forging steel is a manufacturing process used to shape steel by using localized compressive forces, which include hammering, pressing, and rolling. It is a widely used method for producing high quality steel products with exceptional tolerances.
• Forging steel makes the metal stronger for use in mechanical and industrial applications. Parts are more reliable with uniform composition and structure and preferred for high loads and stress.
• The temperature at which steel forging is completed is dependent on the type of processing and can include dies, presses, rollers, and other methods for applying pressure and compressing a workpiece.
• The term steel is a general term used to describe a wide range of alloys produced by the combination of iron and carbon with other alloys. The history of steel began in the iron age when it was found that iron was stronger and harder than bronze.
• The goal of forging steel is to change the grain structure of steel using percussive or compressive forces to produce components that are stronger, tougher, and more reliable. By compressing heated or cold steel, the steel undergoes metallurgical recrystallization that realigns the grain structure to produce exceptionally resilient and reliable parts.

Leading Manufacturers and Suppliers