This article presents all the information you need to know about infrared heaters.
Read further and learn more about:
Infrared heating employs electromagnetic waves to convey energy directly to materials, eliminating the need to warm the air between the infrared source and the target. The released infrared energy generally ranges from 0.7 microns (µ) to 6 µ. By choosing specific wavelengths, energy consumption is optimized, making the heating of the material more efficient.
This heating technique transfers heat directly into materials while keeping the surrounding air at a cooler temperature. Consequently, infrared heaters are appreciated for their energy efficiency, user convenience, and health advantages. They can be powered by electricity, natural gas, or propane, providing a cost-effective and efficient heating solution.
Infrared electromagnetic waves cover an extensive range of wavelengths, from 780 nm to 10 microns in various industrial settings. The shorter the wavelength, the higher the frequency and energy. Infrared heating can generate temperatures between several hundred degrees Celsius and up to 6,512°F (3,600°C).
Recent innovations have expanded the application of infrared heating technology. Today, modern infrared heaters come equipped with a wide array of features and designs to meet the varied demands of industrial, commercial, and residential settings. They are utilized for heating spaces such as homes, offices, garages, and warehouses. Industries leverage infrared heaters for operations such as drying, curing, printing, and thermoforming. In healthcare, infrared heaters are applied in physiotherapy to assist rehabilitation processes.
The infrared spectrum was initially identified by Sir William Herschel, a British-German astronomer, during the early Industrial Revolution (1760-1840). The concept of infrared heating was acknowledged but was not widely adopted until World War II. During this time, the military used infrared heating for drying paints and lacquers on equipment, finding it extremely efficient compared to fuel-intensive convection ovens, which were both costly and a drain on fuel resources.
Infrared heaters were prevalent in workshops and factories during the war. Nevertheless, their use declined after World War II as central heating systems gained popularity.
As focus shifted towards eco-friendly technologies, the development of infrared heaters picked up pace again from the late 20th to the early 21st century. This period saw a considerable expansion in the applications of infrared heating. Advances in design and configuration enabled the installation of infrared heaters across various environments, from residential homes and office spaces to large industrial plants. Technological progress and improved control mechanisms have facilitated the ongoing evolution and widespread acceptance of infrared heating solutions.
Infrared heat is a fundamental form of heating that involves the direct transfer of heat from a heater to an object or material, bypassing the need to heat the surrounding air. This method produces heat similar to that from the sun, making it a natural and efficient way to warm surfaces.
In an infrared heater, panels are heated to a temperature that allows them to emit infrared radiation. This radiation travels through the air until it encounters a solid object or workpiece, directly transferring heat to it. This process mirrors the way heat is transferred between metals and coils using radiant waves.
Unlike traditional heating methods, which first warm the air before affecting objects in the space, infrared heaters are designed to project heat directly onto objects. This approach allows infrared heaters to quickly raise the temperature of surfaces with minimal energy consumption, making them a cost-effective and efficient solution for heating.
Electromagnetic waves consist of oscillating fields that are perpendicular to each other: one representing the electric field and the other representing the magnetic field.
These waves are characterized by their wavelength and frequency. Wavelength refers to the distance between consecutive crests of a wave, and is often measured in nanometers or angstroms within the electromagnetic spectrum. Frequency, measured in Hertz (Hz), indicates the number of wave cycles that occur per second and is used to categorize different types of electromagnetic waves.
There is an inverse relationship between wavelength and frequency. A wave's energy increases with its frequency and decreases with its wavelength. Therefore, waves that have higher frequencies and shorter wavelengths possess more energy and are more effective at transmission, while those with lower frequencies and longer wavelengths have less energy.
Electromagnetic waves differ from mechanical waves in that they do not need a medium to travel. Mechanical waves, such as sound waves, require a medium like air or water to propagate. In contrast, electromagnetic waves can traverse a vacuum. This is why we can feel the sun's heat despite its vast distance from Earth and experience temperature variations under direct sunlight. Infrared heaters utilize this principle in a manner similar to the sun to provide heat.
Infrared radiation occupies the segment of the electromagnetic spectrum situated between visible light and microwave radiation. The wavelengths of infrared waves span from 700 nanometers (approximately 430 terahertz) to 1 millimeter (about 300 gigahertz).
The infrared spectrum covers a wide range of wavelengths, encompassing a broad spectrum of energy and temperature levels. This range of infrared waves is categorized into various segments, including:
| Classification of Infrared Waves | |||||
|---|---|---|---|---|---|
| Region | Abbrevation | °Â²¹±¹±ð±ô±ð²Ô²µ³Ù³ó(μ³¾) | Frequency(THz) | Photo Energy(meV) | Temperature Range(°F) |
| Near-Infrared | NIR | 0.75-1.4 | 214-400 | 886-1653 | 6495.8 to 3266.6 (3591-1797°C) |
| Short Wavelength Infrared | SWIR | 1.4-3 | 100-214 | 413-886 | 3266.6 to 1279.4 (1797-693°C) |
| Mid-Wavelength Infrared | MWIR | 3-8 | 37-100 | 155-413 | 1279.4 to 192.2 (693-89°C) |
| Long-Wavelength Infrared | LWIR | 8-15 | 20-37 | 83-115 | 192.2 to −112 (89 - −80°C) |
| Far Infrared | FIR | 15-1000 | 0.3-20 | 1.2-83 | −112.27 to −454.27 (−80.15 - −270.15°C) |
Infrared waves are utilized in various applications, including radiative heating. They are also employed in fields such as spectroscopy, imaging, and communication technologies.
Radiation refers to the process of heat transfer that occurs through the emission, absorption, and reflection of electromagnetic waves from objects. Any object with a temperature above absolute zero (0 Kelvin or -459.4°F) emits thermal radiation. This radiation results from the random movements, vibrations, and interactions of atoms, molecules, and their constituent particles like protons and electrons.
Different materials and objects emit thermal radiation depending on their temperature. As these objects heat up, they radiate more thermal energy through radiation, which does not directly influence the surrounding molecules. This thermal energy can traverse air, solids, and even vacuums without relying on the emitted radiation of the receiving material. The characteristics of radiation can also be influenced by the surface properties and the angle at which radiation strikes an object.
Besides radiation, heat transfer can also occur through conduction and convection. Conduction involves the transfer of heat through direct interactions between adjacent atoms or molecules, which is common in solids. Heat moves from regions of higher kinetic energy to those of lower kinetic energy during conduction.
In convection, heat transfer happens via the movement of molecules within a fluid. When part of the fluid is heated, the nearby molecules expand and move away from the heat source. This movement carries thermal energy with it, transferring heat to cooler parts of the fluid.
Infrared heaters consist of two primary components: a heating element and a reflector. The heating element converts electrical or fuel-derived chemical energy into heat. The reflector then channels this thermal energy as radiant heat towards nearby objects.
The performance of an infrared heater largely depends on the reflector's efficiency. Reflectors should have high reflectivity to maximize the transfer of radiant heat while minimizing heat absorption from the heating element. Their design typically includes shapes and contours that help direct the infrared waves outward and reduce the likelihood of heat bouncing back. Ideal reflectors are also resistant to corrosion, able to endure high temperatures over time, and easy to clean.
Common materials used for reflectors include aluminum, stainless steel, ceramics, and quartz. Some reflectors are coated with gold or ruby to enhance their reflectivity and improve the concentration of heat onto the target objects.
Flameless heating is essential in various industrial settings, including drying, surface preparation, and improving workflow efficiency. Each application demands precise and controlled heating to maintain product quality. Contemporary manufacturing relies on heating methods that are not only efficient and cost-effective but also precise in delivering the required heat levels.
Infrared heating systems are designed to quickly and evenly heat surfaces. Once activated, these systems provide instant heat, making them ideal for processes such as stamping, pressing, or welding. The use of infrared heaters helps reduce costs by saving energy while delivering the necessary heat for these operations.
Various industrial processes require the application of coatings, including powders or liquids that are either sprayed or brushed on, as well as paints, varnishes, and other protective layers. The key to achieving effective coating adherence lies in the drying method used.
For liquid coatings, infrared heaters are employed to expedite the drying process, resulting in a smooth and uniform surface. In contrast, powder coatings do not undergo drying but require gelling or curing. Infrared heaters accelerate these gelling and curing stages to shorten production cycles.
Infrared welding is primarily applied to plastics to join and seal components like fan parts. It is also utilized for plastic containers and pipes that must endure pressure. When sealing pressure vessels, infrared welding joins parts without introducing particles or debris into the plastic containers and tubes.
In certain plastic manufacturing processes, infrared heating is used in conjunction with vibration welding. This method, which combines vibration and pressure, helps to connect components. Infrared radiation preps the plastic surface for vibration welding and reduces particle formation.
For embossing or laminating plastic surfaces, it is essential to heat them uniformly to prevent material loss, particularly at the edges. Infrared heaters, designed to provide precise and consistent heating, are well-suited for these processes, ensuring optimal preparation of surfaces.
In the automotive sector, infrared laminating ovens fuse material layers, providing enhanced protection and durability. Components such as car doors, consoles, and dashboards have plastic parts covered with foil. Infrared heaters quickly heat the foil, ensuring it adheres to the surfaces efficiently. This rapid heating process not only shortens cycle times but also conserves energy.
Industrial infrared heaters come in three main types: quartz, ceramic, and metal-sheathed. These heaters use electromagnetic infrared radiation and, depending on their construction, can achieve temperatures ranging from 1300 °F to 1600 °F (704 °C to 871 °C), enhancing both efficiency and productivity. Among these, quartz heaters reach the highest temperatures, whereas ceramic heaters are known for being the most cost-effective.
Infrared heaters can additionally be categorized according to the wavelength of the infrared radiation they produce:
NIR heaters instantaneously warm the environment and are typically used in outdoor heating applications.
Infrared heaters can also be identified based on the materials used in their construction. Here are a few examples:
Below are some types of infrared heaters classified by their specific uses:
Infrared heaters offer versatility, simple installation and maintenance, and come in various designs to meet different requirements. The advantages of infrared heating include:
Despite their many advantages, infrared heaters pose some safety risks. The hot core material of an infrared heater needs to be managed to effectively radiate heat, which can lead to severe burns if touched or if there is prolonged exposure at a close range. Directly viewing the intense glow from high-powered infrared heaters can potentially harm vision. Implementing engineering controls and maintaining vigilance can help prevent injuries. However, these drawbacks are outweighed by the numerous benefits that infrared heaters offer.
Radiant heaters are systems that generate heat internally and then radiate it to the nearby objects and people. The sun is a basic example of a radiant heater. When we feel warm on our bodies on a sunny day...
A band heater is a heating device that clamps onto objects to provide external heat using radiant and conductive heating. The different mounting methods of band heaters makes it possible to secure them tightly and...
A cartridge heater is a cylindrical tubular heating device that provides concise and precise heating for various forms of materials, machinery, and equipment. Unlike an immersion heater, a cartridge heater is inserted into a hole in the item to be heated to furnish internal radiant heat...
Ceramic heaters are electric heaters that utilize a positive temperature coefficient (PTC) ceramic heating element and generate heat through the principle of resistive heating. Ceramic materials possess sufficient electrical resistance and...
Electric heating is produced by using a known resistance in an electric circuit. This placed resistance has very few free electrons in it so it does not conduct electric current easily through it. When there is resistance in...
A flexible heater is a heater made of material that can bend, stretch, and conform to a surface that requires heating. The various forms of flexible heaters include polyimide film, silicone rubber, tape...
An immersion heater is a fast, economical, and efficient method for heating liquids in tanks, vats, or equipment. Known as bayonet heaters, they have heating elements that can be directly inserted into a container of water, oil, or other material in order to heat the entire contents...
The idea of an electric heater seems to be out of place in modern society since most buildings have a sophisticated central heating system. That may be true, but electric heaters can be a helpful way of saving energy while providing efficient heating...
A heating element is a material or device that directly converts electrical energy into heat or thermal energy through a principle known as Joule heating. Joule heating is the phenomenon where a conductor generates heat due to the flow of electric current...